Brocade FastIron Ethernet Switch Traffic Management Guide - Manual (Page 93)

show priority-flow-control
Displays the priority flow control (PFC) on the system.
Syntax show priority-flow-control
Modes Privileged EXEC mode
Examples The following example shows the PFC status of all priority groups:
Device# show priority-flow-control
Global PFC Status: Enabled
PFC Enabled on PG0
PFC Disabled on PG1
PFC Disabled on PG2
PFC Disabled on PG3
The following example shows the PFC status disabled:
Device# show priority-flow-control
Global PFC Status: Disabled
History
Release version Command history
8.0.10 This command was introduced.
show qos egress-buffer-profile
Displays information about egress buffer profiles.
Syntax show qos egress-buffer-profile [ user-profile-name | all ]
Parameters user-profile-name
Specifies that information is displayed for the specified egress buffer profile.
all
Specifies that information is displayed for all the egress buffer profiles configured in the
system and a list of all the ports attached to any egress buffer profile.
Modes Global configuration mode
Examples The following example displays information for an egress buffer profile named egress1:
Device(config)# show qos egress-buffer-profile egress1
Egress Buffer Profile: egress1
Ports attached: 1/1/2
Per Queue Details: Share Level:
Queue 0 level4-1/9
Queue 1 level3-1/16
Queue 2 level3-1/16
Queue 3 level3-1/16
Queue 4 level3-1/16
Queue 5 level3-1/16
Queue 6 level3-1/16
Queue 7 level2-1/32
show priority-flow-control
FastIron Ethernet Switch Traffic Management Guide 91
53-1003093-03