Brocade FastIron Ethernet Switch Traffic Management Guide - Manual (Page 51)

5/2 230432 230000
5/6 234113 234000
Syntax: show rate-limit input
The command lists the ports on which fixed rate limiting is configured, and provides the information
listed in the following table for each of the ports.
CLI display of fixed rate limiting information TABLE 27
Field Description
Total rate-limited interface count The total number of ports that are configured for fixed rate limiting.
Port The port number.
Configured Input Rate The maximum rate requested for inbound traffic. The rate is measured in kilobits
per second (kbps).
Actual Input Rate The actual maximum rate provided by the hardware. The rate is measured in
bps.
To display the fixed rate limiting configuration on the ICX 6650 device, enter the show rate-limit input
command.
device#show rate-limit input
Total rate-limited interface count: 5.
Port Configured Input Rate Actual Input Rate
1/1/1 65000 pkts/s 65000 pkts/s
1/1/2 195000 pkts/s 195000 pkts/s
1/1/6 1950 pkts/s 1950 pkts/s
1/5/2 230432 pkts/s 230000 pkts/s
1/5/6 234113 pkts/s 234000 pkts/s
Syntax: show rate-limit input
The command lists the ports on which fixed rate limiting is configured, and provides the information
listed in the following table for each of the ports.
CLI display of fixed rate limiting information TABLE 28
Field Description
Total rate-limited interface count The total number of ports that are configured for fixed rate limiting.
Port The port number.
Configured Input Rate The maximum rate requested for inbound traffic. The rate is measured in packets
per second (pkts/s).
Actual Input Rate The actual maximum rate provided by the hardware. The rate is measured in
pkts/s.
Rate Limiting and Rate Shaping on FastIron X Series and FCX and ICX Series Switches
FastIron Ethernet Switch Traffic Management Guide 49
53-1003093-03