Brocade FastIron Ethernet Switch Traffic Management Guide - Manual (Page 28)

ICX 6650 platforms
The following tables show the default values for the scheduling type for ICX 6650 platforms.
Default values for scheduling type for ICX 6650 platforms TABLE 15
SP SP Jumbo WRR WRR Jumbo Mixed Mixed Jumbo
TC0 SP SP 3 8 15 15
TC1 SP SP 3 8 15 15
TC2 SP SP 3 8 15 15
TC3 SP SP 3 8 15 15
TC4 SP SP 3 8 15 15
TC5 SP SP 3 8 25 25
TC6 SP SP 7 8 SP SP
TC7 SP SP 75 44 SP SP
ICX 6430 platforms
The following table shows the default values for scheduling type for stacking and stand-alone ICX
6430 platforms. The lowest weighted priority is for qosp0, while the highest is for qosp7.
Note that values are provided for QoS priority (QSP) levels. The weights applied to the traffic class
(TC) are the sum of the weights of the QSP levels that map to that TC. For example, QSP0 and QSP1
map to TC0. If the weight for QSP0 is 6 and the weight for QSP1 is 6, then the weight for TC0 is 12.
Refer to the Priority queues for the ICX 6430 table for QoS priority to traffic class mapping.
Default values for scheduling type for stacking systems (for ICX 6430 platforms) TABLE 16
QSP Level SP SP Jumbo WRR WRR Jumbo Mixed Mixed Jumbo
QSP0 SP SP 3 8 15 15
QSP1 SP SP 3 8 15 15
QSP2 SP SP 3 8 15 15
QSP3 SP SP 3 8 15 15
QSP4 SP SP 3 8 40 40
QSP5 SP SP 10 16 SP SP
QSP6 SP SP 75 44 SP SP
Quality of Service
26 FastIron Ethernet Switch Traffic Management Guide
53-1003093-03