PreSonus AudioBox 1818VSL - Manual (Page 29)

23
Owner’s Manual
Ov
er
view
Hook
up
Connec
ting
to
a
Comput
er
Tut
orials
Technical Informa
tion
Tr
oubleshooting and
W
arr
an
ty
Sof
tw
ar
e: V
irtual
StudioLiv
e
AB1818VSL Remot
e,
and S
tudio O
ne Ar
tist
Software: Virtual StudioLive, AB1818VSL Remote, & Studio One Artist 4
Sof
tw
ar
e: V
irtual
StudioLiv
e
AB1818VSL Remot
e,
and S
tudio O
ne Ar
tist
Virtual StudioLive 4.1
4.1.3 Virtual StudioLive: Overview and Fat Channel Tab
VSL provides you with two ways to look at your mix and to
dial in FX settings: The Overview and Fat Channel Tabs.
The Overview Tab provides you with a complete graphical
representation of your Virtual StudioLive mix environment.
The Fat Channel Tab opens a detailed overview of the Fat Channel
parameters for the currently selected channel. The Fat Channel
Tab can be opened either from the tab button at the top of the VSL
window or by simply double-clicking on any of the microviews.
From either tab you can:
• Adjust levels for all analog and digital inputs, all eight playback
streams, both effects buses, the main output level of the
entire mix, and the output levels of each monitor mix.
• Adjust the panning for the analog and digital
inputs and playback streams
• Adjust the send level for both the analog and digital
inputs and playback streams to each FX bus
• Adjust the send level for each channel to
outputs 3 and 4, 5 and 6, and 7 and 8
• Adjust the parameters for the FX preset on each FX bus
• Solo and mute each analog input and playback stream
• Meter the inputs and outputs
From either the Overview or the Fat Channel tab, you can
access the show/hide channel buttons to help keep your
mix organized. You can hide the following channel groups
from your mix: ADAT, DAW Returns, and Outputs.
Show/Hide ADAT Inputs Button Displays/Removes ADAT Input Channels from the Mix.
When this button is enabled, the ADAT input channels will
be displayed in the mixer. If you disable this button, you will
no longer see the ADAT channels in the mixer; however, any
changes or routing that have been made will still be active,
and these channels will still be heard in your mixes.
Show/Hide DAW Returns Button Displays/Removes DAW Playback Streams from the Mix.
When this button is enabled, DAW Playback Streams 1 through
8 will be displayed in the mixer. If you disable this button, you
will no longer see these channels in the mixer; however, any
changes or routing that have been made will still be active,
and these channels will still be heard in your mixes.
Please Note: From VSL, you only have access to DAW Returns 1-8. The ADAT
and S/PDIF output streams can only be accessed from your DAW.