Yokogawa DA100 - Manual (Page 40)

4-11 IM DA100-11E
Overview and Specifications of Ethernet Interface
4
4.8 Displaying the Communication Information
The following information can be displayed by using Telnet.
• Warning information
• Connection information
• Network information
• The timeout for the information display application is 15 minutes.
The operating procedures on Windows 95 Telnet are shown below.
1. Set the mode of the Ethernet module to communication mode and connect the DA100 and the PC.
2. Start the Telnet application that comes with Windows 95.
3. Select “Terminal” - “Preferences” from the menu bar.
The following dialog box opens.
4. Set the parameters as shown below and click “OK.”
Terminal Options
Local Echo: ON
Others : OFF
Emulation: VT-100/ANSI
5. Select “Connect” - “Remote System” from the men bar.
A dialog box for setting the connection destination opens.
6. Set the parameters as shown below and click “Connect.”
Host Name: DA100’s IP address
Port: 34159
Term Type: vt100