Yokogawa DA100 - Manual (Page 36)

4-7 IM DA100-11E
Overview and Specifications of Ethernet Interface
4
4.5 Connection Methods
When Directly Connecting to the PC
If you are directly connecting the DA100 and the PC to read in the measured data, connect them
through a hub as follows.
PC
Ethernet card
Ethernet module
Hub
10BASE-T cable
PC
Ethernet card
Ethernet module
ETHERNET I/F
10BASE-T
SCSI WARNING
100-240V AC
MODEL
NO.
SUFFIX
SUPPLY
FREQUENCY
Made in Japan
STYLE
50/60Hz 130VA MAX
FUSE 250V/T2.5A
SUB UNIT I/F
DC100
ETHERNET I/F
10BASE-T
SCSI WARNING
100-240V AC
MODEL
NO.
SUFFIX
SUPPLY
FREQUENCY
Made in Japan
STYLE
50/60Hz 130VA MAX
FUSE 250V/T2.5A
SUB UNIT I/F
DC100
When Connecting to the Network
An example in which one DA100 and one PC are connected to the network is shown below.
PC
Ethernet card
10BASE-T cable
Network
Ethernet module
P O W E R
1 0 0 - 2 4 0 V 5 0 / 6 0 H z 5 5 V A M A X
DATA ACQUITION UNIT
STATUS
DA100
10BASE-T
Note
• Depending on the condition of the network, the PC may not be able to read in all of the measured data.
• You can connect between networks over a router.
• Accessing a DA100 from multiple PCs at once will lower the communication performance.