Yokogawa Standalone MW100 - Manual (Page 50)

Select ―Communication Setting‖ at
top of screen……
From the ―Communication Setting‖ screen,
Select ―Modbus Client Setting 1‖…..
From the ―Modbus Client Setting 1‖ screen,
Check the ‖Enable‖ box next to ―Client
Function‖…..
The Modbus Client Cycle update rate should be
set at a rate that is appropriate for the
application (this is the time period reflecting how
often the Modbus addresses are updated)…..
The ―Connection‖ and ―Recovery Action‖
settings do not apply for use in this
example…..
Select ‖Apply‖ when settings are complete…..
47