Yokogawa Standalone MW100 - Manual (Page 21)

5 - Explicit Messaging Examples
5.0 SLC 5/05
In this example, the system consists of a 1747-L551C (5/05CPU – 16K Mem, OS501 Series C FRN 10 and Later)
processor and a 1746-NT4 Thermocouple Input Module residing in slot #1. The SLC 5/05’s IP address is 192.168.1.95.
The 1746-NT4 module’s four input channels are sent to the DX Advanced Communication Channels C01 thru C04. The
1746 NT4’s channels are configured for ―Engineering Units‖ which will result in an integer value with an implied decimal
point (i.e. 66.8 = 668). The DX Advanced Measurement Channels 001 thru 010 are being read and stored in 10 words
starting with F10:0.
Data File ―N10:0‖ has been created for Message Instruction Control Block Data. ―N11‖ contains I/O Configuration Data.
Configuration of Channel 1
On the Project Tree, under the ―Controller‖ folder, double -click on ―Channel Configuration‖ (or right click and select
―Open‖).
In the ―Channel Configuration‖ dialog box, select the ―Chan. 1 – System‖ tab.
18