Yokogawa Standalone MW100 - Manual (Page 3)

Important Notice
This Quick Start Guide assumes that the user has a fundamental understanding of the various
Rockwell PLC platforms (MicroLogix, SLC 500, CompactLogix, and ControlLogix), Rockwell software
packages (RSLogix 500 and RSLogix 5000), and the Yokogawa DX Advanced and MW100 Data
Acquisition Recorders. It is not intended to be an instructional manual for the above items. Yokogawa
Corporation provides this book “As Is”, without warranty of any kind, either expressed or i mplied.
Because of the variety of uses for the products described in this publication, those responsible for the
application and use of this equipment must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance and safety requirements,
including any applicable laws, regulations, codes and standards. The illustrations, charts, sample
programs and layout examples shown in this guide are intended solely for purposes of example.
Since there are many variables and requirements associated with any particular installation,
Yokogawa Corporation does not assume responsibility or liability (to include intellectual property
liability) for actual use based upon the examples shown in this publication.
This book could contain technical inaccuracies or typographical errors. Changes are made
periodically to the information herein. Yokogawa Corporation may make improvements and changes
at any time to the product(s) and/or program(s) described in this book.
“ControlLogix”, “CompactLogix”, “SLC500”, “SLC -5/03”, “SLC 5/04”, “SLC 5/05”, “PLC 5”, “FlexLogix”,
“MicroLogix, “RS Linx”, “RSLogix 500”, and “RSLogix 5000”, are all licensed trademarks of Rockwell
Automation.