Yokogawa Standalone MW100 - Manual (Page 38)

In the ―This Controller‖ area, enter the starting data table address for the data to be sent (I:1.0), the Size in Elements
(number of data words) (4), and the Channel (0). In the ―Target Device‖ area
, enter the starting data table address of the
MW100 (N30:0 for Communication Channel C01). Enter the Local Node Address (45 – DF1 equivalent to
192.168.001.096 in the ENI configuration. The ―Octal‖ section will fill in automatically).
Then click on the close window (X) at the top right of the Setup Screen (the screen can also be closed by clicking on the
―Setup Screen‖ In the MSG instruction. The MSG Write to the MW100 is now complete.
35