Yokogawa DM8C/VD6 Liquid Density Analyzer - Manual (Page 15)

< 1. GENERAL >
1-5
IM 12T03A01-02E
Case construction: Dust and rain proof construction
Coating color: Door: Equivalent to Munsell 2.8GY6.4/0.9
Case: Equivalent to Munsell 2.0GY3.1/0.5
Coating fi nish: Baked fi nish epoxy resin
Mounting: To panel, wall or 2-inch pipe
Air purge connector: Rc1/8, Rc1/4, or 1/4NPT female is also optionally available
Electrical connection: Five holes, 27 mm dia.
Attached with four plastic waterproof plugs equivalent to JIS A15, and one
plastic waterproof plug equivalent to JIS A20.
Weight: Approx. 7.5 kg
1.1.4 Special Cable Model DM8W
Type: Six-conductor double shield cable
Insulator: Polyethylene
Sheath:
Polyvinyl chloride
Insulation resistance: 1000 M Ω/km
Conductor resistance: 15.31 Ω/km
Finished O.D.: 15.8 mm
Weight: Approx. 0.3 kg/m
1.1.5 Standard Accessories
Syringe (for injecting standard
solution or solvenet)
1 pcs
for Detector (VD6)
Brush (for cleaning the detector) 1 pcs
Allen wrench for terminal box 1 pcs
Allen wrench for locking the cover 1 pcs
O-Ring 1 bag
Silica gel 2 packs
Fuse for the converter (3A) 1 pcs for Converter (DM8C)