Watlow Series SD6 PID Controller with DeviceNet Addendum - Manual (Page 5)

Wa t l o w S e r i e s S D 6 P I D w i t h D e v i c e N e t ■ 5 ■
Table 8. Identity Object Instance Attributes
Class Services: NONE
Instance Services:
• RESET (O,1) GET ATTRIBUTE SINGLE
DeviceNet Object
Class Code: 03hex
The DeviceNet Object is used to provide the configuration
and status of a physical attachment to DeviceNet.
The MACID attribute provides the network address for the
device. If the rotary switches used to specify the device
MACID are set to a valid MACID, i.e. a value from 0 to 63,
the MACID attribute shall have Get Only access. If the
rotary switches are set to the programmable mode, the
MACID attribute shall have Get and Set access.
The Baud Rate attribute specifies the data rate for the
device. If the rotary switch used to set the data rate speci-
fies a valid data rate, i.e. 125, 250, or 500K Baud, the Baud
Rate attribute shall have Get Only access. If the rotary
switches are set to the software programmable mode, the
MACID shall have Get and Set access.
The Allocate Master/Slave Connection Set service of the
DeviceNet object shall be a required service for all devices.
This implies a requirement that all devices are Group 2
devices on the DeviceNet network. Additionally, all devices
shall support, as a minimum, the Explicit connection and
the I/O Poll connection in the Master/Slave connection set.
The Release Master/Slave Connection Set service of the
DeviceNet object shall be a required service.
Refer to the DeviceNet Specification (Vol. I, Sec. 5-5) for
complete requirements.
Table 9. DeviceNet Object Revision History
Revision Description
01 Initial Release
02 Modification of Baud Rate Attribute
Behavior
Attribute # Access Rule Name DeviceNet Data
Type Description of
Attribute Semantics of
Values
1 Get Vendor ID UNIT Identification of each
vendor by number.
This is Vendor ID
153. See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
2 Get Product Type UNIT Identification of gen-
eral type of product.
This is Type 0. See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
3 Get Product Code UNIT WATLOW SD6-DN,
CODE IS 105
WATLOW SD6-DS,
CODE IS 104
See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
4 Get Revision STRUCT of: Revision of the item
the Identity Object
represents See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
5 Get Status WORD Summary status of
device See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
6 Get Serial Number UDINT Serial number of
device
Set in accordance
with a Watlow manu-
facturing guidelines.
See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2
7 Get Product Name SHORT_STRING Human readable ID:
“Watlow Series SD6”
See “Semantics”
DeviceNet Spec, Vol.
II, Sec. 6-2.2