Watlow Series SD6 PID Controller with DeviceNet Addendum - Manual (Page 14)

Wa t l o w S e r i e s S D 6 P I D w i t h D e v i c e N e t ■ 1 4 ■
Attribute # Access
Rule Name DeviceNet
Data Type Description of Attribute Semantics of Values
109 Get/Set InfoSense TM 4 UINT Set sensor point 4 code 0 to 999
(default is 500)
110 Get/Set Process Scale Low mA UDINT Set the low scale for process input 0.00 to 20.00 mA
(* 1000) (when Sensor
Type set to mA, default
= 4.00 mA)
111 Get/Set Process Scale Low
Volts UDINT Set the low scale for process input 0.0 to 10.00 V
(* 1000)
(when Sensor Type set
to Volt, default = 0.00 V)
112 Get/Set Process Scale High mA UDINT Set the high scale for process input 0.00 to 20.00 mA
(* 1000) (when Sensor
Type set to mA, default
= 20.00 mA)
113 Get/Set Process Scale High
Volts UDINT Set the high scale for process input 0.0 to 10.00 V
(* 1000)
(when Sensor Type set
to Volt, default = 0.00 V)
114 Get/Set Units Scale Low DINT Set the low range for process input units -1999 to 9999 (* 1000)
(default = -1999)
115 Get/Set Units Scale High DINT Set the high range for process input
units -1999 to 9999 (* 1000)
(default = 9999)
116 Get/Set Set Point Low Limit
Thermocouple DINT Set the low range for the set point Minimum operating
range (of sensor) to Set
Point High Limit – 0.001
(if Sensor Type =
Thermocouple, default =
min. for K-
Thermocouple) (* 1000)
117 Get/Set Set Point Low Limit
RTD DINT Set the low range for the set point -328 to Set Point High
Limit – 0.001 (if Sensor
Type = RTD, default = -
328)
(* 1000)
118 Get/Set Set Point Low Limit mA
and volts DINT Set the low range for the set point -1999 to Set Point High
Limit – 0.001 (if Sensor
Type = V or mA,
default = -1999)
(* 1000)
119 Get/Set Set Point High Limit
Thermocouple DINT Set the high range for the set point Units Scale Low to
max operating range of
sensor, if Input Type =
Thermocouple (default
= max operating range
for K-Thermocouple) (*
1000)
120 Get/Set Set Point High Limit
RTD DINT Set the high range for the set point Set Point Low Limit +
0.001 to 1472, if Input
Type = RTD (default =
1472) (* 1000)