Proface APL3000B - Node Box PC - Manual (Page 99)

PL3000 Series Hardware Manual
5-8
(3) Insert each of the fasteners, as shown. Be sure to
pull the fastener back until it is flush with the rear
of the attachment hole.
(4) Use a Phillips screwdriver to tighten each fastener
screw and secure the PL in place.
• Tightening the screws with too much force can damage the PL unit’s plastic case.
• The torque required to tighten these screws is 0.8 N•m.
Insertion Slots
Locations of the 12 slots