System set, System set switch – Proface APL3000B - Node Box PC User Manual
Page 59
PL3000 Series Hardware Manual
3-18
System Set Switch
Switch
No.
Description
ON
OFF
Factory
Settings
Notes
1
Internal setting
Reserved Reserved OFF
Do not change. (Factory setting)
2
Implements the
logical inversion
operation for RAS
output
Normal
Close
Normal
Open
OFF
RAS output is a CLOSE state when
the Switch and the system is ON.
When the Switch is OFF, it is the
opposite. The RAS Output keeps
Normal OPEN when the Soft OFF
state occurs or the power turns OFF.
3
Sets up an enabled/
disabled state for
the front USB port
execution control
function
*1 *2
*1
For panel computer only
*2
The Setting up an enabled/Disabled state for USB port execution control function is
available for only Windows
®
2000 and Windows
®
XP. Make sure to disable the function
of the setting when other OS is used.
Enabled
Disabled
ON
*3
*3
As for PL-3000B Series without revisions, it's been set OFF as factory settings on SW
No.3 and 8.
The front USB port is available when
the switch is ON. It is unavailable
when the switch is OFF.
4
Internal setting
Reserved Reserved OFF
Do not change. (Factory setting)
5
Internal setting
Reserved Reserved ON
Do not change. (Factory setting)
6
Internal setting
Reserved Reserved ON
Do not change. (Factory setting)
7
Internal setting
Reserved Reserved ON
Do not change. (Factory setting)
8
Internal setting
Reserved Reserved ON
Do not change. (Factory setting)
9
Internal setting
Reserved Reserved OFF
Do not change. (Factory setting)
10
Internal setting
Reserved Reserved OFF
Do not change. (Factory setting)
SEE