Proface APL3000B - Node Box PC - Manual (Page 86)

Chapter 4 Dimensions
4-23
4.5.3 Cable Attached Dimensions
Unit: mm [in.]
*1
*1 When the AC power supply connector (straight) is used, this is the clearance between the cable
connector extends and the panel cut opening. When a DC power supply connector is used, the
measurement is 7mm [0.28in.] beyond the panel cut opening.
• All the above values are designed to allow for bends in the cable. The dimensions
given here are representative values depending on the type of connection cable
used. Therefore, they are all intended for reference only.
19 [0.75]
*1
61 [2.40] (Speaker output interface)
53 [2.09] (Ethernet interface)
29 [1.14] (USB interface)
20 [0.79] (Serial interface)
1 [0.04] (DVI-I interface)
These three figures apply to the 2 slots
AC type unit.