Proface APL3000B - Node Box PC - Manual (Page 111)

PL3000 Series Hardware Manual
5-20
(2) Insert the CF Card firmly into the CF Card slot, and check that the eject button pops out.
(3) Install the CF Card cover and fix it with two screws. The torque should be 0.5 to 0.6 N
•m.
„ Removing the CF Card
(1) Press the eject button in fully to remove the CF Card from the CF Card slot.
(2) Replace the CF Card cover and secure it in place using the attachment screws (2). The torque should be
0.5 to 0.6 N
•m.
„ Backup of CF Card
The CF Card has a data overwrite limit of approximately 100,000 times. Therefore, be sure to back up all
CF Card data regularly to another storage media. (100,000 times assumes the overwriting of 500 KB of data
in DOS format.)
If your PC is equipped with a PC Card Slot:
(1) Install the CF Card into a CF Card Adapter (GP077-CFAD10) and insert it into a PC card slot of a
personal computer.
(2) Save the data of the CF Card with your personal computer.
If your PC is NOT equipped with a PC Card slot:
(1) Use a commercially available PC Card Reader, or a CF Card Reader.
CF Card Eject Button