Proface APL3000B - Node Box PC - Manual (Page 63)

PL3000 Series Hardware Manual
3-22
3.4.2 Internal switches of the front module.
„ Touch Panel Set Switch
Switch
Location
Switch Name
Factory
Settings
Description
SW1 Touch Panel Set Switch
1 to 2: ON
3 to 4: OFF
4-point DIP switch. For Touch Panel
Set Switch details, see
„ Touch Panel Set Switch.
SW2 — Version Dependant
Internal setting.
Do not change. (Factory setting)
PL-3600T/3600K Series:
1:ON, 2:ON, 3:ON, 4:OFF
PL-3700T/3700K Series:
1:ON, 2:OFF, 3:ON, 4:OFF
PL-3900T Series:
1:OFF, 2:OFF, 3:ON, 4:OFF
Switch
No.
Description ON OFF
Factory
Settings
Notes
1 to 2
Internal setting Reserved Reserved
ON
Do not change. (Factory setting)
3 OFF
4
Cancellation
function of two point
touch on the touch
panel
*1
*1 When two points are pushed, it is considered that middle point between the two points
is touched according to the nature of the analog resistive touch panel. When the switch,
etc. is set on the middle point, it will be enabled and may operate. To prevent such a
switch from malfunction in case of pushing two points, turn ON Switch No.4 in advance,
then the middle point will be disabled for two point touch.
Enabled Disabled OFF
The middle point is not considered to
be touched when the switch is ON. It
is considered to be touched when the
switch is OFF.
SW1 SW2
ON ON
Rear face of the front module