Proface APL3000B - Node Box PC User Manual
Page 49
PL3000 Series Hardware Manual
3-8
Additional Memory Combinations
When adding more memory, it is recommended to install it in the combinations shown below for the best
performance.
Expansion Slots
Expansion slot supply current and external load current limit
Provide the expansion slots so that the external load current including the power-supply current load for the
PCI and the power-supply current load for the USB, RAS and COM does not exceed the values described in
the table below.
Total current load
Expansion slot
PCI Rev.2.3 (33MHz) 2 slots/4 slots
Clock Accuracy
*6
±180 sec. /month (range of error depending on the situation temperature
and power-off)
*1
Even though the monitor connected to a PL unit matches the specifications of the PL
unit's output signal, the display may not be correct. Please test your monitor with the
PL unit prior to operation.
*2
Only when the panel computer is used.
*3
Only when the panel computer with Keypad is used.
*4
Do not insert or remove the unit connected to the IDE during conduction because the
unit does not support hot-swap.
*5
When connecting Pro-face FP3000 Series to PL-3000B Series, use the Pro-face DVI-
D cable (10m) FP-DV01-100. For details, please refer to “3.4.1 Internal switches of
the control box” (page 3-16).
*6
The clock, RTC, built-in the PL unit has a slight timing error. The range if the error will
be between +300 and -300 sec. / month, depending on the PL unit’s conditions such
as lifetime usage or temperature difference. If you use the PL unit in a system where
timing is critical, adjust the clock in regular intervals.
Total capacity
Slot 1
Slot 2
512MB
512MB
-
1GB
512MB
512MB
1GB
-
2GB
1GB
1GB
2GB
-
4GB
2GB
2GB
Slot Type
Slot No.
Compliant bus
Available board size
2 slot type
4 slot type
Slot 1
PCI Rev.2.3 (5 V)
180 x 106.68mm
[7.09 x 4.2in.] or less
Slot 2
4 slot type
Slot 3
255 x 106.68mm
[10.04 x 4.2in.] or less
Slot 4
Power Supply Capacity
DC5V
DC12V
DC-12V
DC3.3V
Current load
PCI (2 slots)
2.0A
1.0A
0.1A
1.0A
PCI (4 slots)
4.0A
1.0A
0.1A
2.0A
USB (4 ports)
2.0A
—
—
—
USB (5 ports)
*1
*1
Only when the panel computer is used.
2.5A
—
—
—
RAS (1 port)
—
0.1A
—
—
COM (2 ports)
1.0A
—
—
—
SEE