Proface APL3000B - Node Box PC - Manual (Page 98)

Chapter 5 Installation and Wiring
5-7
„ Installing the PL
(1) Insert the PL into the panel cut, as shown.
(2) Insert each fastener’s hook into the slot of the PL.
The number of the slots varies depending on the
model.
PL-3600T Series: 4 slots
PL-3600K/3700T Series: 8 slots
PL-3700K/3900T Series: 12 slots
• Before installing the PL unit on a panel, remove the control box from the front
module and then set the internal switch setting.
SEE 5.2 Installing/removing the front module and the control box (page 5-9)
3.4 Internal Switches Specifications (page 3-16)
• When replacing the Xycom Automation 3612KPM/4612KPM with the PL-3600K Series,
remove the attachments from the PL-3600K Series in advance.
SEE 4.3.4 Panel Cut Dimensions (page 4-15)
Installation Panel
Hook
Insertion Slots
Locations of the 4 slots Locations of the 8 slots
Insertion Slots