Proface APL3000B - Node Box PC - Manual (Page 77)

PL3000 Series Hardware Manual
4-14
4.3.3 Cable Attached Dimensions
Unit: mm [in.]
*1
*1 When the AC power supply connector (straight) is used, this is the clearance between the cable
connector extends and the panel cut opening. When a DC power supply connector is used, it will project
9mm [0.35in.] beyond the panel cut opening.
• All the above values are designed to allow for bends in the cable. The dimensions
given here are representative values depending on the type of connection cable
used. Therefore, they are all intended for reference only.
3 [0.12]
*1
35 [1.38] (DVI-I interface)
14 [0.55] (Serial interface)
5 [0.20] (USB interface)
19 [0.75] (Ethernet interface)
27 [1.06] (Speaker output interface)
These three figures apply to the 2 slots
AC type unit.