Proface PS4800 - 19 Panel PC" - Manual (Page 36)

Characteristics
36
Industrial Personal Computer Characteristics
Characteristics of Celeron 827E Pre-installed Models
The characteristics of the Celeron 827E Pre-installed models are shown below:
Element Characteristics
0 slot 1 slot 2 slots
Expansion Slots – 1 = 1 PCI or PCIe 2 = 1 PCI + 1 PCIe
or
2 = 2 PCI
Slide-in Slot None 1 slide-in equipped with one
of the following:
 DVD-RW
 or HDD, SSD, CFast
(with Slide-in Disk
Adapter unit) through
Slide-in Slot Adapter unit
1 slide-in equipped with one
of the following:
 DVD-RW
 or HDD, SSD, CFast
(with Slide-in Disk
Adapter unit) through
Slide-in Slot Adapter unit
Intel® Chipset and Pro-
cessor Celeron M 827E 1.40 GHz + 1.5 MB (do not support RAID option)
Cooling Method Passive heat sink for the operation without HDD storage device into Slide-in Disk. Option-
al fan kit necessary for the operation with HDD storage device into Slide-in Disk.
SDRAM 2 x DDR3 25.6 GB/s - 16 GB max
Graphics Controller Intel® HD Graphics 3000
Video Mem-
ory Up to 1 GB (reserved from main memory)
Color depth 32-bit (maximum)
RGB Reso-
lution 350 MHz RAMDAC, up to 2048 x 1537 @75 Hz (QXGA)
DVI Resolu-
tion Up to 1920 x 1200 (WUXGA)
Slide-in Disk 1 slot equipped
 HDD, SSD or CFast with Slide-in Disk Adapter unit
NOTE: Modifying products to install an HDD into a Slide-in Disk when it was not installed
from factory, requires to change the unit firmware settings for proper behavior of the fan
(that are required when running with HDD into a Slide-in Disk) - Please contact Pro-face
support if you want to proceed such modification.
CFast TYPE-I 1SLOT
Reset Button Yes
Buzzer Buzzer support is depending on OS (for example, no support for Windows® 7 Ultimate
(32-bit) and Windows® 7 Ultimate (64-bit).
Industrial
Personal
Computer
Weight Standard
Model 4.0 kg (8.81 lb) 4.1 kg (9.03 lb) 4.2 kg (9.26 lb)
Rear Mount
Model 3.9 kg (8.59 lb) 4.0 kg (8.81 lb) 4.1 kg (9.03 lb)