Proface PS4800 - 19 Panel PC" - Manual (Page 153)

PS-4600 Series User Manual
153
Slide-in Disk Drive Description and Installation
Overview
Before installing or removing any Slide-in Disk drive, shut down Windows® in an
orderly fashion and remove all power from the device.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
 Remove all power from the device before removing any covers or elements of
the system, and prior to installing or removing any accessories, hardware, or
cables.
 Unplug the power cable from both the Industrial Personal Computer and the
power supply.
 Always use a properly rated voltage sensing device to confirm power is off.
 Replace and secure all covers or elements of the system before applying power
to the unit.
 Use only the specified voltage when operating the Industrial Personal
Computer. The AC unit is designed to use 100...240 Vac input. The DC unit is
designed to use 24 Vdc. Always check whether your device is AC or DC
powered before applying power.
Failure to follow these instructions will result in death or serious injury.