Proface PS4800 - 19 Panel PC" - Manual (Page 107)

PS-4600 Series User Manual
107
WARNING
RISK OF BURNS
Do not touch the surface of the heat sink during operation.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
CAUTION
OVERTORQUE AND LOOSE HARDWARE
 Do not exert more than 0.5 Nm (4.5 lb-in) of torque when tightening the
installation fastener, enclosure, accessory, or terminal block screws. Tightening
the screws with excessive force can damage the plastic installation fastener.
 When installing or removing screws, ensure that they do not fall inside the
Industrial Personal Computer chassis.
Failure to follow these instructions can result in injury or equipment damage.
CAUTION
STATIC SENSITIVE COMPONENTS
Industrial Personal Computer internal components, including accessories such as
RAM modules and expansion boards, can be damaged by static electricity.
 Keep static-producing materials (plastic, upholstery, carpeting) out of the
immediate work area.
 Do not remove ESD-sensitive components from their anti-static bags until you
are ready to install them.
 When handling static-sensitive components, wear a properly grounded wrist
strap (or equivalent).
 Avoid unnecessary contact with exposed conductors and component leads with
skin or clothing.
Failure to follow these instructions can result in injury or equipment damage.