Proface PS4800 - 19 Panel PC" - Manual (Page 145)

PS-4600 Series User Manual
145
PCI/PCIe Card Installation
Overview
Before installing or removing a PCI/PCIe card, shut down Windows® in an orderly
fashion and remove all power from the device.
PCI/PCIe Cards with Cables
When using a PCI/PCIe card with an external cable attached, install a clamp or other
device to secure the cable.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
 Remove all power from the device before removing any covers or elements of
the system, and prior to installing or removing any accessories, hardware, or
cables.
 Unplug the power cable from both the Industrial Personal Computer and the
power supply.
 Always use a properly rated voltage sensing device to confirm power is off.
 Replace and secure all covers or elements of the system before applying power
to the unit.
 Use only the specified voltage when operating the Industrial Personal
Computer. The AC unit is designed to use 100...240 Vac input. The DC unit is
designed to use 24 Vdc. Always check whether your device is AC or DC
powered before applying power.
Failure to follow these instructions will result in death or serious injury.
WARNING
EQUIPMENT DISCONNECTION OR UNINTENDED EQUIPMENT OPERATION
 Ensure that power, communication, and accessory connections do not place
excessive stress on the ports. Consider the vibration environment when making
this determination.
 Securely attach power, communication, and external accessory cables to the
panel or cabinet.
 Use only commercially available USB cables.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.