Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 6)

6
English
Product Related Information
This equipment has been designed to operate outside of any hazardous location. Only
install this equipment in zones known to be free of a hazardous atmosphere.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
 Disconnect all power from all equipment including connected devices prior to
removing any covers or doors, or installing or removing any accessories, hardware,
cables, or wires except under the specific conditions specified in the appropriate
hardware guide for this equipment.
 Always use a properly rated voltage sensing device to confirm the power is off where
and when indicated.
 Replace and secure all covers, accessories, hardware, cables, and wires and confirm
that a proper ground connection exists before applying power to the unit.
 Use only the specified voltage when operating this equipment and any associated
products.
Failure to follow these instructions will result in death or serious injury.
DANGER
POTENTIAL FOR EXPLOSION
Install and use this equipment in non-hazardous locations only.
Failure to follow these instructions will result in death or serious injury.