Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 10)

LT-4201TM/4301TM
10
English
Display Module/Rear Module Separation Cable Range
Agency Certifications for LT Unit
For information on Standards and Regulations, such as certified models and certificates,
see the marking on the product or the following link:
http://www.pro-face.com/worldwide.html
LT unit is manufactured in accordance with UL 508 and CSA C22.2 n ° 142 for industrial
control equipment.
For use on a flat surface of a Type 1, Type 4X (indoor use only) enclosure.
Hazardous Substances
This product is a device for use in factory systems. When using this product in a system,
the system should comply with the following standards in regards to the installation
environment and handling:
 WEEE, Directive 2012/19/EU
 RoHS, Directives 2011/65/EU
 RoHS China, Standard SJ/T 11363-2006
 REACH regulation EC 1907/2006
CE Markings
This product conforms to the necessary requirements of the following Directives for
applying the CE label:
 2006/95/EC Low Voltage Directive
 2004/108/EC EMC Directive
This conformity is based on compliance with IEC61131-2.
Reference Cable Length
PFXZXMADSM31 3 m (9.84 ft.)
PFXZXMADSM51 5 m (14.40 ft.)
NOTE: The outer diameter of the cable is 8 mm (0.13 in.). To assemble this product, you need 20 mm
(0.78 in.) more space to bend the cable in the end of the rubber.