Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 2)

1
Preface
Thank you for purchasing Pro-face’s the Hybrid Terminal Block.
The Hybrid Terminal Block (Hereafter referred to as the "HTB") network interface module with built-in Inputs/Outputs is
small in size. Its modularity, by adding I/O expansions, can be used to optimize an application by providing the necessary
number of I/Os.
The HTB connects directly to a CANopen field bus.
The HTB accepts up to 7 EX modules.
Before operating your HTB, be sure to read this manual to familiarize yourself with the HTB's operation procedures and
features.
© 2008 Copyright Digital Electronics Corporation. All rights reserved.
Product names used in this manual are the trademarks / registered trademarks of their respective owners.
NOTICE
1. Copying this manual's contents, either in whole or in part, is prohibited without the express permission of Digital
Electronics Corporation, Japan.
2. The information contained in this manual is subject to change without notice.
3. If you should find any errors or omissions in this document, please contact Digital Electronics Corporation to
report your findings.
4. Regardless of Clause 3 above, Digital Electronics Corporation shall not be held responsible for any damages,
losses or third-party damages resulting from the use of this product.