4 canopen features, 5 canopen standards, 4 canopen features -3 – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 12: 5 canopen standards -3
Chapter 1 Introduction
1-3
1.1.4
CANopen Features
•
open fieldbus (specifications have been released),
•
maximum communication speed of 1Mbits/s,
•
noise resistance improved by the resend process of the hardware,
•
interoperability and interchangeability of devices,
•
supported by a large number of international manufacturers (approximately 500 member companies),
•
access to all device parameters,
•
supports cyclic communication and acyclic communication (event-driven), thereby reducing bus data
volume and increasing response speed.
1.1.5
CANopen Standards
CANopen specifications are defined by the CiA group and can be accessed on the group site at
http://www.can-cia.org/. The sourcecodes for master and slave devices are available from the various
suppliers.
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" LT3200 - 3.8 All-in-One HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"