Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 13)

13
• If the lines cannot be separated, use shielded lines and create a ground from the shield
line.
• Use noise-reducing external wiring methods to increase overall system reliability.
• To prevent power surges or noise interference, use ducts to separate all DC I/O or
current circuit wires from communication cables.
• To prevent malfunctions due to noise, communication cables must be wired sepa-
rately from high-frequency lines and power lines such as high-voltage lines, high-
current lines, and inverters.
14. Dimensions
14.1 Dimensions
82
[3
.23
]
41
.15
[1
.62
]
71 [2.80]
6 [
0
.2
4]
90
[3
.54
]
4
.5 [0.1
8]
69 [2.72]
5
.5 [
0
.2
2]
38 [1.50]
23.
5 [
0
.9
3]
4
[0.16]
2
[0
.0
8
]
6 [
0
.2
4] Top
Right Side
Bottom
Rear Left Side
Unit: mm [in.]
Front