Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 48)

Cut to Length with Multi Stroke Program
F2=CONTINUOUS
If the F2 key was pressed then the servo will be in the auto total mode and the
following screen appears.
AUTOMATIC TOTAL=000000
JOB #=XX PILOTS=NO
LGTH=XXX.XXX SPM=XXX
SPEED=XXX% F4=RETURN
Pressing the F4 key, stops the automatic cycle and the main menu screen
appears.
MAIN MENU
F1=JOB # F2=MANUAL
F3=AUTOMATIC CYCLE
F4=REVIEW JOB PROGRAM
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (47 of 66) [12/10/2001 3:44:58 PM]