Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 36)

Cut to Length with Multi Stroke Program
Periodically grease with lubriplate or equivalent grease to anti-backup (if
purchased) & pinch roll actuating piston nose where it contacts the pressure
plate.
PRECAUTIONS & SAFETY
NEVER - Put screwdrivers or foreign materials in feed rolls
NEVER - Hold onto material as it is being fed through the servo
NEVER - Wear neckties around the servo feed rolls
NEVER - Force the rolls open by prying on them
NEVER - Modify the mechanical aspects of the servo feed
CAUTION - Contact the factory before drilling any holes in the unit
CAUTION - Wear proper eye protection when working around the servo
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (35 of 66) [12/10/2001 3:44:58 PM]