Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 31)

Cut to Length with Multi Stroke Program
SERVO FAULT DISPLAY
The Pacific Scientific drive has a list of internal faults and displays the number
of that fault on it’s readout located on the front of the drive. Rapid Air now
displays the fault on the keypad display. If a fault occurs the screen will
display the number and the name of the fault, but there will not be an
explanation accompanying the fault. This is a tool to help you to trouble shoot
if the servo fails to perform when commanded.
If a fault was displayed the servo controller will have to be turned off and
restarted to clear the fault. If the fault is still present when the Pacific
Scientific unit is restarted, the fault may not be displayed on the keypad
screen as the fault will not let the internal program restart. The control panel
will have to be opened to view the fault again.
A list of probable faults and some explanation is included in this section. If
more help is required, then Rapid Air will have to be contacted.
FAULT CODE
(Predefined Variable, Integer, Status Variable, Read-Only)
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (30 of 66) [12/10/2001 3:44:57 PM]