Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 46)

Cut to Length with Multi Stroke Program
MANUAL MODE F1=INCH
F2=SINGLE FEED MODE
F4=EXIT MANUAL MODE
CYCLE ROLL WITH KEYS
F2=SINGLE FEED
If the operator presses F2 then the following screen is displayed. The single
feed mode is active and every time the F1 key is pressed then the feed will
cycle and move the distance indicated on the feed length line.
JOB#=000 FL=000.000
SEQ#=00
F1=FEED F2=CUT
F3=FEED/CUT F4=EXIT
Pressing F4 once resets the program to the manual mode display. Pressing
the F4 key twice resets the program to the main menu display. If the F4 key
was pressed twice the following screen is displayed.
MAIN MENU
F1=JOB # F2=MANUAL
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (45 of 66) [12/10/2001 3:44:58 PM]