IEI Integration AFL-F08A v2.10 - Manual (Page 53)

AFL-F08A-N270 Panel PC
Page 41
ƒ Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
4.3 Turn off the Power
WARNING:
Failing to turn off the system before opening can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
4.4 Opening the System
Remove the rear cover as shown in Section
541H541H
3.4 .
Remove the internal cover as shown in Section
542H542H
3.6 .
4.5 Replacing Components
4.5.1 Memory Module Replacement
If the memory module fails, follow the instructions below to replace the memory module.
Step 1: Locate the memory module indicated below.