IEI Integration AFL-F08A v2.10 - Manual (Page 52)

AFL-F08A-N270 Panel PC
Page 40
4.1 System Maintenance Introduction
If the components of the AFL-F08A-N270 fail they must be replaced. Components that
can be replaced include:
ƒ CF Module
ƒ Bluetooth module
ƒ Wireless LAN module
ƒ SO-DIMM module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL-F08A-N270 are described below.
4.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-F08A-N270 may result in permanent damage to the
AFL-F08A-N270 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-F08A-N270. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL-F08A-N270 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: - When configuring the AFL-F08A-N270, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL-F08A-N270.