IEI Integration PPC-5xxx-9455 v1.10 - Manual (Page 75)

PPC-5xxx-9455 Panel PC
Page 57
4.7 Mounting the System
WARNING!
When mounting the PPC-5xxx-9455 flat panel PC onto an arm, wall or
into a panel, it is advisable to have more than one person help with the
installation to prevent accidental damage to the panel and avoid
personal injury.
The methods of mounting the PPC-5xxx-9455 are:
ƒ Wall mounting
ƒ Panel mounting
ƒ Arm mounting
ƒ Rack mounting
The mounting methods are fully described below.
4.7.1 Wall Mounting
To mount the PPC-5xxx-9455 flat panel PC onto a wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them.