IEI Integration PPC-5xxx-9455 v1.10 - Manual (Page 109)

PPC-5xxx-9455 Panel PC
Page 91
Î CPU FAN 1 Mode Setting [Full On Mode]
Use the CPU FAN 1 Mode Setting option to configure the CPU fan.
Î
Full On Mode D EFAULT Fan is on all the time
Î FAN x Mode Setting [Automatic Mode]
Use the FAN x Mode Setting option to configure the second fan.
Î
Full On Mode Fan is on all the time
Î
Automatic mode D EFAULT Fan is off when the temperature is low
enough. Parameters must be set by the
user.
Î
PWM Manually mode Pulse width modulation set manually
When the FAN x Mode Setting option is in the Automatic Mode, the following
parameters can be set.
ƒ Temperature Limit of OFF
ƒ Temperature Limit of Start
ƒ Temperature Limit of Full
ƒ Fan Start PWM
ƒ Slope PWM
When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following
parameters can be set.
ƒ CPU Fan PWM control
Î Temperature Limit of OFF [025]
WARNING:
Setting this value too high may cause the fan to stop when the CPU is
at a high temperature and therefore cause the system to be damaged.