IEI Integration PPC-5xxx-9455 v1.10 - Manual (Page 44)

PPC-5xxx-9455 Panel PC
Page 26
2.6.1 Analog CRT Support
The VGA port connects a peripheral monitor to the PPC-5xxx-9455 system. A DB-15 VGA
connector on the external peripheral interface connector panel is interfaced to the Intel®
945G Northbridge. The Intel® 945G supports analog CRT monitors with the following
features:
ƒ Supports max DAC frequency up to 400 MHz
ƒ 24-bit RAMDAC support
ƒ DDC2B compliant
ƒ Up to 2048 x 1536 mode support
2.6.2 LVDS Support
The LVDS connector drives the built-in LCD panel. The 30-pin LVDS crimp connector is
connected to the Chrontel CH7308B chipset, which is connected to the Intel® 945G
through the SDVO interface.
ƒ 18/24-bit outputs
ƒ Up to 140 megapixels per second
2.7 Memory
All processors supported by the PPC-5xxx-9455 have their own internal DDR2 memory
controller. The DDR2 controller has the following features:
ƒ Low-latency, high-bandwidth
ƒ 800 MHz 128-bit DDR2 SDRAM controller
ƒ Supports one un-buffered DDR2 SO-DIMM
ƒ Each SO-DIMM has a maximum capacity of 1.0 GB
The DDR2 controller on the processor is interfaced to one SO-DIMM socket on the
PPC-5xxx-9455.