IEI Integration IEM-945GSE - Manual (Page 63)

IEM-945GSE ETX 3.0 Module
Page 51
6.3.2 IDE Configuration
Use the IDE Configuration menu (
5
BIOS Menu 4) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS Menu 4: IDE Configuration
ƒ ATA/IDE Configurations [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Î
Disabled Disables the on-board ATA/IDE controller.
Î
Compatible Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode
supports up to 4 storage devices.