IEI Integration IEM-945GSE - Manual (Page 29)

IEM-945GSE ETX 3.0 Module
Page 17
ƒ CPU (FAN1) speed
ƒ System (FAN2) speed
ƒ System (FAN3) speed
The IEM-945GSE monitors the following voltages:
ƒ Vcore
ƒ +12 V
ƒ +3.30 V
ƒ +5.00 V
ƒ VBAT
The values for the above environmental parameters are all recorded in the BIOS
Hardware Health Configuration menu.
2.6.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the IEM-945GSE are listed
below.
ƒ Minimum Operating Temperature: 0ºC (32°F)
ƒ Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the Northbridge and Southbridge chipsets to ensure the operating
temperature of these chips remain low.
2.6.3 Power Consumption
4
Table 2-2 shows the power consumption parameters for the IEM-945GSE running with a
1.6 GHz Intel® ATOM™ N270 with 2.0 GB DDR2 memory.