IEI Integration IEM-945GSE - Manual (Page 24)

IEM-945GSE ETX 3.0 Module
Page 12
2.4 Intel® 945GSE Northbridge Chip
The Intel® 945GSE is connected to the 1.6 GHz Intel® ATOM™ N270 CPU through the
FSB and to the Intel® ICH7M Southbridge through the DMI. The Intel® 945GSE is
connected to the SO-DIMM and supports DDR2 memory. The Intel® 945GSE also
provides graphics capabilities (described elsewhere). The Intel® 945GSE and its
connections are shown in Figure 2-4.
2.4.1 DDR2 Controller
There is one 200-pin DDR2 SO-DIMM socket on the IEM-945GSE. The socket supports
DDR2 SO-DIMM with the following specifications:
ƒ Maximum Memory supported 2 GB
ƒ Support for DDR2 at 400 MHz and 533 MHz
ƒ No support for Dual-Channel Interleaved mode of operation
The SO-DIMM socket is shown in Figure 2-4.
2.4.2 Graphics
The Intel® 945GSE Northbridge chipset has an Intel® Gen. 3.5 integrated graphics
engine that supports the following display devices through connectors on the carrier
board:
ƒ Analog CRT
ƒ LVDS
ƒ TV-Out
ƒ SDVO ports
The graphics are interfaced to the carrier board through the ETX connectors shown in
Figure 2-4.
2.4.2.1 Analog CRT (VGA)
The Intel® 945GSE internal graphics engine, with an integrated 400 MHz RAMDAC and
hot plug CRT support, supports analog CRT monitors up to QXGA.