IEI Integration ICE-945GSE v1.11 - Manual (Page 29)

ICE-945GSE COM Express Type 2 Module
Page 17
SATA controller specifications are listed below.
Supports two SATA drives
Supports 1.5 Gb/s data transfer speeds
Supports Serial ATA Specification, Revision 1.0a
2.5.9 SPI Bus
The Serial Peripheral Interface is a short distance serial bus for communication with other
devices on the motherboard. The SPI interface from the board is interfaced to the items
below:
SPI BIOS.
2.5.10 USB Controller
Up to eight high-speed, full-speed or low-speed USB devices are supported by the Intel®
ICH7M on the ICE-945GSE. High-speed USB 2.0, with data transfers of up to 480 MB/s, is
enabled with the Intel® ICH7M integrated Enhanced Host Controller Interface (EHCI)
compliant host controller. USB full-speed and low-speed signaling is supported by the
Intel® ICH7M integrated Universal Host Controller Interface (UHCI) controllers.
2.6 Environmental and Power Specifications
2.6.1 System Monitoring
The ICE-945GSE monitors the following temperatures:
CPU temperature
System temperature
On-chip temperature
The ICE-945GSE monitors the following fan speeds:
CPU (FAN1) speed
System (FAN2) speed
System (FAN3) speed
The ICE-945GSE monitors the following voltages: