IEI Integration ICE-945GSE v1.11 - Manual (Page 24)

ICE-945GSE COM Express Type 2 Module
Page 12
On-die 512-kB, 8-way L2 cache
Support for IA 32-bit architecture
Intel® Streaming SIMD Extensions-2 and -3 (Intel® SSE2 and Intel® SSE3)
support and Supplemental Streaming SIMD Extension 3 (SSSE3) support
Micro-FCBGA8 packaging technologies
Thermal management support via Intel® Thermal Monitor 1 and Intel Thermal
Monitor 2
FSB Lane Reversal for flexible routing
Supports C0/C1(e)/C2(e)/C4(e)
L2 Dynamic Cache Sizing
Advanced power management features including Enhanced Intel
SpeedStep® Technology
Execute Disable Bit support for enhanced security
2.4 Intel® 945GSE Northbridge Chip
The Intel® 945GSE is connected to the 1.6 GHz Intel® ATOM™ N270 CPU through the
FSB and to the Intel® ICH7M Southbridge through the DMI. The Intel® 945GSE is
connected to the SO-DIMM and supports DDR2 memory. The Intel® 945GSE also
provides graphics capabilities (described elsewhere). The Intel® 945GSE and its
connections are shown in Figure 2-4.
2.4.1 DDR2 Controller
There is one 200-pin DDR2 SO-DIMM socket on the ICE-945GSE. The socket supports
DDR2 SO-DIMM with the following specifications:
Maximum Memory supported 2 GB
Support for DDR2 at 400 MHz and 533 MHz
No support for Dual-Channel Interleaved mode of operation
Enhanced Addressing support (Swap only)
The SO-DIMM socket is shown in Figure 2-4.