Warner Electric Advanced Technology Tension Clutches - Manual (Page 10)

10
Warner Electric • 800-234-3369 819-0339
Remove the pulley, sheave, or sprocket if it inter-
feres with removing the capscrews (Item 9-2).
(See Figure 32)
15. Disassemble the armature hub assembly by
removing capscrews (Item 9-2), lock washers and
armature segment (Item 9-1). (See Figure 33)
Remove the setscrews (Item 8). (See Figure 34)
Remove the external and internal retaining rings
(Items 3 and 4) from the splined hub (Item 7) and
the armature hub (Item 2). (See Figure 35)
Locate and support on the sheave end of the
assembly near the fins and press on the field end
of the splined hub (Item 7). (See Figure 36)
To remove the hub and bearing assembly,
remove the bearings (Item 5) and spacer (Item 6)
from the hub (Item 7) by pressing them off. (See
Figure 37)
Proceed with reassembly per the following
instructions:
Figure 32
Figure 33
Figure 34
Figure 35
Figure 36
Figure 37