Vestil EPT-30 - Manual (Page 47)

47
Curtis PMC 1207/1207A Manual 40
6
6 — PROGRAMMER OPERATION
PROGRAMMER OPERATION
The universal Curtis PMC handheld programmer (optional) allows you to
program, test, and diagnose Curtis PMC programmable controllers. The pro-
grammer is powered by the host controller, via an RJ11 modular connector
located in the adjustment panel on top of the controller (1207 models) or via a
4-pin Molex connector on the front panel (1207A models).
When the programmer is first plugged into the controller, it displays the
controller’s model number, date of manufacture, and software revision code.
Following this initial display, the programmer displays a prompt for further
instructions.
C U R T I S P M C
+ + + + + + + + + + + + + + + + + + + +
+
+
+
A DIVISION OF CURTIS INSTRUMENTS INC.
SCROLL
DISPLAY
CHANGE
VALUE
PROGRAM DIAGNOSTICS
MORE INFO
TEST
+
+
+
Change the selected
item’s value (up or down)
with these two keys
Choose the Program, Test,
or Diagnostics Mode with
one of these three keys
The LED in the corner of
the key lights up to identify
the mode of operation
Get more information
about selected items with
this key. Also, use this
key in combination with
other keys to put the
programmer in Special
modes.
Scroll the 4-line
display (up and down)
with these two keys
A 4-line LCD display is
presented in this window