Vestil AIR-2000 User Manual

Estil, Anufacturing

rev. 1/25/2013 AIR-2000-AIR, manual.doc

AIR-2000-AIR PNEUMATIC AND HYDRAULIC

DOUBLE-FUNCTION SCISSOR CART

NSTRUCTION

ANUAL

RECEIVING INSTRUCTIONS:

After delivery, IMMEDIATELY remove the packaging from the Hook-Base in a manner that preserves the

packaging and maintains the orientation of the product in the packaging; then inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered during the inspection,
immediately record a complete description of the damage on the bill of lading. If the product is
undamaged, discard the packaging.

NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:

a) Instructions in this manual; or
b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential

damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or
maintaining this product.

Table of Contents
Hazard identification: explanation of signal words…………………………………………………………………… 2
Safety Guidelines……………………………………………………………………………………………………….. 2
Product specifications by model……………………..………………………………………………………………… 3
Operation….………………………………… ………………………………………………………………………...3-4
Maintenance & Inspections……………………………………………………………............................................. 5
Troubleshooting……………………………………………………………………………………………………….. 6-7
Label placement diagram………………………………………………………………………………………………. 8
Limited warranty………………………………………………………………………………………………………9-10

ESTIL

ANUFACTURING

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail:

[email protected]

Page 1 of 10