Vestil EPT-30 - Manual (Page 21)

21
Curtis PMC 1207/1207A Manual 14
Curtis ET-XXX Electronic Throttle
The Curtis ET-XXX provides throttle and forward/reverse inputs to the 1207.
Wiring for the Curtis ET-XXX is shown in Figure 10.
2 — INSTALLATION & WIRING: 1207 Controller
There is no fault detection built into the ET-XXX, and the controller will
detect only open wiper faults. It is the responsibility of the vehicle manufacturer
to provide any additional throttle fault detection necessary for the application.
The ET-XXX can be integrated into a control head to provide wigwag-style
throttle control. Alternatively, a complete control head assembly is available from
Curtis. This control head assembly—the CH series—combines the ET-XXX
throttle with a variety of standard control head switch functions for use in walkie
and lift truck applications.
Fig. 10 Wiring for Curtis
ET-XXX electronic throttle
(“Type 2”).
8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9
ET-XXX
B-
B+
GREEN
ORANGE
BLACK
BLACK/WHITE
WHITE
WHT/BRN
Pin 16
Pin 12
Pin 11
Pin 7
Pin 6
KSI Input
Forward
Reverse
Pot Low
0–5V Input
PIN KEY (1207)
KEYSWITCH
WHT/
GRN