Vestil ABLT-H-LP - Manual

rev. 12/14/2012 ABLT-H, Manual
Page 1 of 5
ABLT-H-LP
SERIES
A
IR
B
AG
L
IFT
T
ABLES
I NSTRUCTION M ANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the Hook-Base in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the
product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) the instructions in this manual; or b) information provided on labels affixed to the product.
Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: [email protected]
Table of Contents
Hazard identification: explanation of signal words…………………………………………………………………… 2
Safety Guidelines……………………………………………………………………………………………………….. 2
Product specifications by model……………………..………………………………………………………………… 3
Installation………………………………………………………………………………………………………………... 3
Operation………………………………………………………………………………………………………………… 3
Maintenance………………………………………………………………………………........................................3-4
Limited warranty………………………………………………………………………………………………………….5