beautypg.com

Precautions – Teledyne LeCroy ADP300_305 User Manual

Page 6

background image

ADP30x Probe

Precautions

To avoid personal injury or damage to property, review and comply with the

following safety precautions.
Use product only as specified.
Do not overload.
To avoid electric shock or fire hazard, do not apply any

potential that exceeds the maximum rating of the probe and/or the probe

accessory, whichever is less.
Connect and disconnect properly. To avoid electric shock or fire hazard, always

make the connections from the probe input leads to the probe accessory that

you intend to use before making any connections to a voltage source. Do not

connect or disconnect accessories to a votage source unless they are first

connected to the probe input leads.
Use only accessories compatible with the probe. Use only accessories that are

rated for the application. Substituting other accessories may create a potential

shock or burn hazard. Ensure connections between probe input leads and probe

accessories are secure before connecting them to a voltage source.
Comply with voltage derating curve.
When measuring higher frequency signals,

comply with the Voltage vs. Frequency Derating Curve (see Page 6).
Observe all terminal ratings. To avoid electric shock or fire, do not use the

probe above the input limits shown on the probe as well as all accessories.
Do not remove probe casing. Removing the probe’s case or touching exposed

connections may result in electric shock.
Use only within operational environment listed. Do not use in wet or explosive

atmospheres. Keep product surfaces clean and dry.
Handle with care. Probe accessory tips are sharp. They can puncture skin or

cause other bodily injury if not handled properly.
Keep fingers behind the finger guard of the probe accessories.
Do not operate with suspected failures.
Before each use, inspect the probe and

accessories for any damage such as tears or other defects in the probe body,

cable jacket, accessories, etc. If any part is damaged, cease operation

immediately and sequester the probe from inadvertent use.

2

923079-00 Rev A